Cisco Systems 4500 manual Removing the Module

Chapter 4 Removing and Replacing FRUs

Replacing Backplane Modules on a Catalyst 4507R or 4510R Switch

Step 7 Pull out the module while holding the top left and top right corners. (See Figure 4-24.)

Note When handling the modules, do not touch the chips or the gold edge contacts on the module.

Figure 4-24 Removing the Module

130660

Step 8 Put the replacement module in at roughly a 30 degree angle, and gently push the module down. Make sure you apply force evenly on the left and right. (See Figure 4-25.)

Figure 4-25 Seating the Replacement Module

			130661
		Catalyst 4500 Series Switches Installation Guide
4-28	78-14409-08