Chapter 2 Preparing for Installation
Power Connection Guidelines for
Power Connection Guidelines for AC-Powered Systems
This section provides guidelines for connecting the Catalyst 4500 series switch AC power supplies to the site power source. Basic guidelines include the following:
•Make sure each chassis power supply has its own dedicated branch circuit.
•Size the circuits according to local and national codes.
•If you are using a 200/240 VAC power source in North America, use a
•Place the source AC outlet within 6 feet (1.8 meters) of the system and make sure it is easily accessible.
•Make sure the AC power receptacles used to plug in the chassis are the grounding type. The grounding conductors that connect to the receptacles should connect to protective earth ground at the service equipment.
Four types of
•1000
•1300
Note For North America, the power cord plug types and appliance couplers on the power supplies are different for the 1000 W power supplies and the 1300 W power supplies; for other countries, the plugs shown are the same for the 1000 W and 1300 W power supplies.
|
| Catalyst 4500 Series Switches Installation Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|