Cisco Systems 3650 manual Rear Panel, Color Uplink Ports Link Status

Chapter 1 Product Overview

Rear Panel

Figure 1-6 Uplink Ports LEDs

1

2

		Catalyst 3650	48PoE+		2X10G
	G1	G2	G3	TE3		G4
							TE4
	1	2		3			4
G1 LED	3	G3, TE3 LED
G2 LED	4	G4, TE4 LED

347665

Table 1-8	Uplink Ports LEDs
Color		Uplink Ports Link Status
Off		Link is off.
Green		Link is on, no activity.
Blinking green		Activity on a link, no faults.
Blinking amber		Link is off due to a fault or because it has exceeded a limit set in the
		switch software.
		Caution Link faults occur when noncompliant cabling is connected
			to an SFP or SFP+ port. Use only standard-compliant
			cabling to connect to Cisco SFP and SFP+ ports. You must
			remove from the ports any cable or device that causes a
			link fault.
Amber		Link for the SFP or SFP+ has been disabled.

Rear Panel

The switch rear panel includes StackWise connectors, ports, fan modules, and power supply modules. See Figure 1-7.

	Catalyst 3650 Switch Hardware Installation Guide
OL-29734-01		1-15