Cisco Systems 3650 manual Switch Installation, Preparing for Installation, Safety Warnings

Page 25

C H A P T E R 2

Switch Installation

This chapter describes how to install and connect a Catalyst 3650 switch. It also includes planning and cabling considerations for stacking switches. Read the topics and perform the procedures in this order:

•Preparing for Installation, page 2-1

•Planning a Switch Data Stack, page 2-4

•Installing the Switch, page 2-9

•Connecting to the StackWise Ports, page 2-15

•Connecting Devices to the Ethernet Ports, page 2-19

•Where to Go Next, page 2-22

For initial switch setup, how to assign the switch IP address, and for powering information, see the switch getting started guide on Cisco.com.

Preparing for Installation

•Safety Warnings, page 2-1

•Installation Guidelines, page 2-3

•Tools and Equipment, page 2-4

Safety Warnings

This section includes the basic installation caution and warning statements. Translations of the warning statements appear in the Regulatory Compliance and Safety Information for the Catalyst 3650 Switch document available at Cisco.com. Read this section before you start the installation procedure.

Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43

Warning Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and equipment damage. Statement 48

Catalyst 3650 Switch Hardware Installation Guide

	OL-29734-01	2-1

Image 25

Contents Purpose PrefaceDocument Conventions Related Documentation Obtaining Documentation and Submitting a Service RequestSwitch Model Cisco IOS Image Description Switch ModelsProduct Overview Product Overview Switch Models Switch Model Cisco IOS Image Description Front Panel Catalyst 3650-48PD-L Switch Front Panel PoE and PoE+ 10/100/1000 Ethernet PortsManagement Ports USB Mini-Type B Port USB Type a PortLEDs Uplink PortsSFP and SFP+ Modules Color System Status 3 4 5Port LEDs and Modes Mode LED Port Mode DescriptionPort Mode Port LED Color Meaning Color USB Console LEDColor Description PoE+ LEDColor PoE+ Status Uplink Ports LEDsColor Uplink Ports Link Status Rear PanelStackWise Ports RJ-45 Console Port LEDRJ-45 Console Port Status1 Power Supply Modules PoE Option Port Switch Models Default Power Supply Available PoE PowerAC-Power Supply Module LEDs ModelsFan Modules DC-Power Supply Module LEDsEthernet Management Port Management OptionsRJ-45 Console Port Network Configurations OL-29734-01 Preparing for Installation Switch InstallationSafety Warnings OL-29734-01 Installation Guidelines Verifying Switch Operation Planning a Switch Data StackPowering Off the Switch Tools and EquipmentData Stack Cabling Configurations Switch Stacking GuidelinesData Stack Bandwidth and Partitioning Examples Data Stacking up to Four Switches in a Side-by-Side MountingExample of a Data Stack with Half Bandwidth Connections Power-On Sequence for Switch Data StacksChanges to Switch Stack Membership Installing the Switch Rack-Mounting Rack-Mounting Brackets Attaching the Rack-Mount BracketsAttaching Brackets for 19-inch Racks Mounting the Switch in a Rack Mounting the Switch in a RackTable- or Shelf-Mounting After Installing the SwitchConnecting to the StackWise Ports Installing the StackWise Adapter in a StackWise Port Installing SFP and SFP+ Modules Installing and Removing SFP and SFP+ Modules14 Installing an SFP Module in an Uplink Port Removing SFP or SFP+ Modules Connecting Devices to the Ethernet Ports10/100/1000 Ethernet Port Connections Switch Installation Connecting Devices to the Ethernet Ports Device Crossover Cable PoE+ Port ConnectionsWhere to Go Next Power Supply Module Overview Power Supply InstallationPart Number Description AC OK LED 640-W AC Power Supply Module 6 5 AC Power Supply Module LEDs Installation GuidelinesDC Power Supply Module LEDs Installing or Replacing an AC Power Supply Statement Installing a DC Power SupplyEquipment That You Need Grounding the SwitchStripping the Ground Wire 10 Attaching the Ground Lug and Wire Assembly Wiring the DC Input Power Source Installing the DC Power Supply in the Switch12 DC Source a Isolated From Source B with No Common Ground Finding the Power Supply Module Serial Number14 1025-W AC Power Supply Serial Number 16 640-W DC Power Supply Module Serial Number Overview Installing the FanFan Module Installation Fan LED Installing a Fan ModuleFan Module Serial Number Finding the Fan Module Serial NumberDiagnosing Problems TroubleshootingSwitch Post Results Switch LEDsBad or Damaged Cable Switch ConnectionsEthernet and Fiber Cables Link StatusPoE and PoE+ Port Connections 10/100/1000 Port ConnectionsSFP Modules Interface Settings Switch PerformancePing End Device Spanning Tree LoopsAutonegotiation and Network Interface Cards Resetting the SwitchCabling Distance Replacing a Failed Data Stack Member Finding the Switch Serial NumberSwitch Specifications Technical SpecificationsEnvironmental Ranges Physical Specifications Power Specifications Power Supply Module SpecificationsPower Specifications Physical Specification Fan Module SpecificationsOperating Specification OL-29734-01 Connector Specifications Connector and Cable Specifications10/100/1000 Ports SFP and SFP+ Modules Gigabit Ethernet CX1 SFP+ Copper Connectors10/100/1000 Ethernet Management Port Figure B-4 Simplex LC Cable ConnectorFigure B-7 10/100 Port Pinouts Console PortStackWise Cables Cable and Adapter SpecificationsStackWise Cables Minimum Bend Radius and Coiled Diameter StackWise AdaptersLocating the StackWise Adapter Serial Number Cable Part Number Cable Length Minimum Bend RadiusStackWise Adapter Blanks SFP and SFP+ Module Cable SpecificationsTwo Twisted-Pair Cable Pinouts Four Twisted-Pair Cable PinoutsIdentifying a Crossover Cable Switch Console RJ-45-to-DB-9 Port DTEConsole Port Adapter Pinouts DeviceDSR DTR CTS RTS Switch Console RJ-45-to-DB-25 Port DTEAccessing the CLI Configuring the Switch with the CLI-Based Setup ProgramAccessing the CLI Through Express Setup Accessing the CLI Through a Console PortUSB Console Port Installing the Cisco Microsoft Windows USB Device Driver Uninstalling the Cisco Microsoft Windows XP USB Driver Uninstalling the Cisco Microsoft Windows USB DriverIP Settings Entering the Initial Configuration InformationConfiguring the Setup Program Enter a host name for the switch, and press Return These choices appear OL-29734-01