Step 4 Press and hold the Mode button until the four LEDs next to the Mode button turn green. This takes approximately 3 seconds.
SYST |
|
|
| |
STAT |
|
|
| |
DLX |
|
|
| |
SPD |
|
|
| |
- |
| MODE | CONSOLE | |
WS | CBS- |
|
| |
|
| 3020- |
| |
|
|
| HPQ |
1
1Mode button
UID | 17 | |
MEDIA | ||
| ||
| 20 | |
| 17 |
153156
Step 5 Release the Mode button.
If the LEDs next to the Mode button begin to blink after you press the button, release it. Blinking LEDs mean that the switch module has already been configured and cannot go into Express Setup mode. For more information, see the “Resetting the Switch Module” section on page 23.
Step 6 Connect a
12