Cisco Systems SLM248G4PS, SLM224G4PS manual Log Table, Rmon History Table

Page 33

Chapter 5

Configuration Using the Web-based Utility

Statistics > RMON History

RMON History

Source Interface  Indicates the interface from which the history samples were taken. To specify the interface, select Unit No. (default) and specify the unit number and port from the drop-down menus, or select LAG and select the LAG number from the drop-down menu.

Sampling Interval  Indicates (in seconds) how often samples are taken from the ports. The range is 1 to 3600. The default is 1800 seconds (30 minutes).

Current Number of Samples to Keep  Indicates the number of samples to save.

Owner  Displays the RMON station or user that requested the RMON information. Maximum length is 20 characters.

Click Add to List to add the configured RMON sampling to the Log Table at the bottom of the screen.

Log Table

Source Interface  Displays the interface from which the history samples were taken.

Sampling Interval  Indicates the time in seconds that samplings are taken from the port.

Sampling Requested  Displays the number of samples to be saved. The range is 1-65535. The default value is 50.

Current Number of Samples  Displays the current number of samples taken.

Owner  Displays the RMON station or user that requested the information.

Click View History Table to open the RMON History Table screen.

To delete an entry from the Log Table, select the entry, then click Delete.

RMON History Table

Statistics > RMON History > RMON HIstory Table

The RMON History Table screen contains interface specific statistical network samplings. Each table entry represents all counter values compiled during a single sample.

History Entry No.  Displays the history table entry number.

Owner  Displays the RMON station or user that requested the RMON information. The maximum length is 20 characters.

Sample No.  Indicates the sample number from which the statistics were taken.

Drop Events  TBD

Received Bytes (Octets)  Displays the number of octets received on the interface since the device was last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.

Received Packets  Displays the number of packets received on the interface since the device was last refreshed, including bad packets, Multicast and Broadcast packets.

Broadcast Packets  Displays the number of good Broadcast packets received on the interface since the device was last refreshed. This number does not include Multicast packets.

Multicast Packets  Displays the number of good Multicast packets received on the interface since the device was last refreshed.

CRC Align Errors  Displays the number of CRC and Align errors that have occurred on the interface since the device was last refreshed.

Undersize Packets  Displays the number of undersized packets (less than 64 octets) received on the interface since the device was last refreshed.

24/48-Port 10/100 + 4-Port Gigabit Smart Switch with Resilient Clustering Technology and PoE

27

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Port or 48-Port 10/100 + About This Guide About This GuideIcon Descriptions Online ResourcesTable of Contents Snmp Global Parameters Snmp Views Snmp Group Profile SnmpGigabit Ethernet Fiber Optic Cabling Appendix B About Switch StackingAppendix G Contact Information Appendix C Glossary Appendix D SpecificationsIntroduction ChapterChapter Product Overview Switch LEDs and ports are located on the front panelProduct Overview Front PanelPower The Power port is where you connect the AC power Switch’s LEDs and ports are located on the front panelBack Panel Product Overview Installation Chapter InstallationPre-Installation Considerations Placement OptionsHardware Installation Desktop PlacementRack-Mount Placement Uplinking the Switch Configuring Stack ModeTo set up a stack with six switches, follow these steps Power off the new unit 5 the former master unit Connect port G1 on Unit 2 to port G2 on UnitConnect port G1 on Unit 3 to port G2 on Unit Chapter Configuration Using Console Interface Using telnetLogin screen appears. Proceed to the Login section below Login How to Use the Console InterfaceSwitch Main Menu System Configuration MenuSystem Information Management SettingsUser & Password Settings Security SettingsIP Configuration Http Reboot System Restore System Default SettingsStack Configuration File ManagementPort Status Menu Port ConfigurationPoE Settings System ModeHelp LogoutSetup Chapter Configuration Using Web-based UtilitySetup Summary Device InformationSetup Network Settings Setup ZoomOrange The administrator has closed down this port Clicking on a port displays the Port Configuration screenSet Time Setup TimeLocal Time Daylight SavingPort Management Port Settings Setup Stack ManagementPort Management Sntp ServersPort Management Port Settings Port Configuration Port Management Link Aggregation LAG ConfigurationPort Management Lacp Port Management PoE Power SettingsVlan Management Vlan Management Port SettingVlan Management Create Vlan Vlan TableVlan Management Port to Vlan Vlan Management Vlan to PortJoin Vlan to Port Statistics Statistics Rmon StatisticsStatistics Rmon History Rmon History Log TableRmon History Table Statistics Rmon Alarms Add AlarmAlarm Table Statistics Rmon Events Statistics Port UtilizationStatistics Interface Statistics Security Security 802.1x SettingsEthernet-like ParametersSecurity Port Security Setting TimerSecurity Storm Control Security Management Access ListQoS Security RadiusBroadcast Only Counts only Broadcast traffic QoS Queue Settings QoS CoS SettingsCoS Settings CoS DefaultQoS Dscp Settings QoS Basic ModeQoS Bandwidth Spanning Tree Global SettingSpanning Tree STP Status Spanning Tree Global STPSpanning Tree STP Port Settings Bridge SettingsSpeed Displays the speed at which the port is operating Multicast Vlan Igmp SettingsMulticast Igmp Snooping Multicast Bridge MulticastSnmp Global Parameters Multicast Bridge Multicast Forward AllSnmp Group Profile Snmp ViewsSnmp Group Membership Snmp CommunitiesUser Name Provides a user-defined local user list Snmp Notification Recipient Snmp Notification FilterBase Table Advanced TableAdmin User Authentication AdminUser Authentication Local User EditAdmin Static Address Admin Dynamic AddressSecure The entry is defined for locked ports Admin Cable Test Admin Port MirroringQuery Clear Table If selected, this clears the MAC Address tableAdmin Save Configuration Admin Firmware Upgrade Admin RebootAdmin Factory Default Admin Logging Admin Server LogsAdmin Memory Logs Logout Admin Flash LogsAppendix a About Gigabit Ethernet Fiber Optic Cabling Appendix aGigabit Ethernet Fiber Optic CablingAbout Switch Stacking Appendix B About Switch StackingAppendix B Stack Building Quick StartStack Resiliency Advanced StackingUnit IDs Unit ID AllocationStack Units Startup Process Master DiscoveryMaster Election User Controls Unit and Port ConfigurationStacking Examples Replacing a Failed Stack Member in a Running StackStack Master Failure and Replacement Splitting a Stack Subgroup Contains Both Master Unit and Backup Master UnitBoth Stacks Kept Running During Insertion Merging Two StacksInserting Too Many Units Stacking Cable FailureAppendix C Appendix C GlossaryGlossary Glossary Mail protocol on the Internet Packet a unit of data sent over a networkAppendix C Appendix D Specifications SpecificationsAppendix D Power in compliance with Ieee Class of Service Port-based 802.1p Vlan priority-basedDimensions Management VlanObtaining Warranty Service Warranty InformationAppendix E Exclusions and LimitationsTechnical Support Warranty InformationRegulatory Information Appendix FRegulatory Information Appendix F Norsk Norwegian Miljøinformasjon for kunder i EU Appendix F Contact Information Appendix G
Top Page Image Contents