Cisco Systems VIP-FE-TX/4E manual Loaded from Flash

Page 25

 

Versatile Interface Processor Functions

Step 5

To ensure that the new microcode is used when you reboot the system, add the appropriate

 

commands to the configuration file. To modify the configuration file, enter the configure

 

terminal command, as follows:

 

Router# config t

 

Enter configuration commands, one per line. End with CNTL/Z.

 

Router(config)#

Step 6

Specify that you are changing the microcode for the VIP (microcode vip), and that it will

 

load from Flash memory (flash) . Then add the filename of the new microcode image to be

 

loaded from Flash:

 

Router(config)# microcode vip flash slot0:vip11-1

Step 7

To save the configuration file, press Ctrl-Z.

Step 8

Copy the new configuration to nonvolatile random-access memory (NVRAM):

 

Router# copy running-config startup-config

 

The microcode reload command is automatically added to your running configuration.

 

The new VIP microcode image will load automatically the next time the system boots or

 

reinitializes.

Step 9

To load the new microcode immediately, you can issue the microcode reload configuration

 

command (you must be in Configuration mode to enter this command):

 

Router# config t

 

Enter configuration commands, one per line. End with CNTL/Z.

 

Router(config)# microcode reload

 

Immediately after you enter the microcode reload command and press Return, the system

 

reloads all microcode. Configuration mode remains enabled; after the reload is complete,

 

press Ctrl-Zto exit from Configuration mode and return to the system prompt.

Step 10

To verify that the VIP is using the correct microcode, issue the show startup-configor

 

show controllers cbus command, which indicates the currently loaded and running

 

microcode version for each interface processor and the SP or SSP in the Cisco 7000 series

 

routers.

 

Router# show controllers cbus

This completes the procedure for downloading microcode to Flash memory.

VIP-FE-TX/4E Installation and Configuration 25

Image 25
Contents VIP-FE-TX/4E Installation and Configuration Table of Contents Versatile Interface Processor Functions What is the VIP?Dram VIP Software Prerequisites What is the Cisco 7000 Family?VIP Hardware Prerequisites Cisco 7000, Interface Processor End Cisco 7000 SeriesCisco 7010, Interface Processor End Cisco 7500 SeriesCisco 7507, Interface Processor End Cisco 7513, Interface Processor End VIP Port Adapter Hardware Configuration Overview VIP Microcode Overview VIP Installation PrerequisitesList of Parts and Tools Electrical Equipment Guidelines Safety GuidelinesOnline Insertion and Removal-An Overview Versatile Interface Processor Functions H1984 Removing an Interface Processor Filler VIP InstallationRemoving a VIP Captive installation screws Installing a VIP Checking the VIP Installation Checking the Installation and Verifying VIP StatusVersatile Interface Processor Functions Verifying VIP Status Using show Commands Router# show controller cbus Upgrading VIP Microcode Router# show flash Loaded from Flash Handling a Dram SIMM-Example Only Upgrading and Replacing Dram SIMMsDram Removing and Replacing Dram SIMMs Fast Ethernet Overview FE-TX Port AdapterVIP Port Adapter Functions Dram MII FE-TX Port Adapter LEDsFE-TX Port Adapter Receptacles, Cables, and Pinouts ConnectorReceive Data + RxD+ FE-TX MII Connection, Receptacle Attaching FE-TX Port Adapter Interface Cables Attaching the Ferrite Bead around the RJ-45 Cable Configuring the FE-TX InterfaceVIP Port Adapter Functions Fast Ethernet Interface Port Number Example Cisco 7505 Shown VIP Port Adapter Functions Configuring the FE-TX Port Adapters-Descriptions and Examples Router# configure terminal Router# show version Ethernet 10BASE-T Overview 4E Port Adapter4E Port Adapter Description and 10BASE-T Specifications Cable Specifications for 10-Mbps 10BASE-T Parameter RJ-45 4E Port Adapter Receptacles, Cables, and Pinouts 4E Port Adapter LEDsReceive Data + RxD+ Attaching 4E Port Adapter Interface Cables Configuring the 4E Interfaces VIP Port Adapter Functions 10BASE-T Interface Port Number Example Cisco 7505 Shown Router# sh int e 3/1/0 Slot Adapter Port n Slot Adapter Port Port n Router# show version Selv Circuit Warning Translations Cisco Information Online