Cisco Systems VIP-FE-TX/4E manual 4E Port Adapter, Ethernet 10BASE-T Overview

Page 44

VIP Port Adapter Functions

4E Port Adapter

The following sections discuss the 4E port adapter, which is shown in Figure 23.

Ethernet 10BASE-T Overview

4E Port Adapter Description and 10BASE-T Specifications, page 45

4E Port Adapter LEDs, page 47

4E Port Adapter Receptacles, Cables, and Pinouts, page 47

Attaching 4E Port Adapter Interface Cables, page 49

Configuring the 4E Interfaces, page 50

Figure 23 4E Port Adapter, Faceplate View

ENABLED

 

 

 

1

3

 

0

1

2

3

LINK

 

 

 

 

 

 

0

2

ETHERNET 10BT

H4497

Ethernet 10BASE-T Overview

The VIP 4E port adapter provides up to four IEEE 802.3 Ethernet 10BASE-T interfaces on the VIP. Each Ethernet 10BASE-T interface allows a maximum bandwidth of 10-Mbps, for a maximum aggregate bandwidth of 40 Mbps. All four ports run at line speed.

The term Ethernet is commonly used for all carrier sense multiple access/collision detection (CSMA/CD) local-area networks (LANs) that generally conform to Ethernet specifications, including IEEE 802.3. Ethernet Version 2 and IEEE 802.3 were based on, and developed shortly after, Ethernet Version 1. The slight differences between Ethernet and IEEE 802.3 are implemented in hardware, and both are supported automatically by the 4E without any hardware configuration changes. Together, Ethernet and IEEE 802.3 are the most widely used LAN protocols. They are well suited to applications where a local communication medium must carry sporadic, occasionally heavy traffic at high peak data rates.

Stations on a CSMA/CD LAN can access the network at any time. Before sending data, the station listens to the network to see of it is already in use. If it is, the station waits until the network is not in use, then transmits. A collision occurs when two stations listen for network traffic, hear none, and transmit simultaneously. When this happens, both transmissions are damaged, and the stations must retransmit. The stations detect the collision and use backoff algorithms to determine when they should retransmit.

44VIP-FE-TX/4E Installation and Configuration

Image 44
Contents VIP-FE-TX/4E Installation and Configuration Table of Contents What is the VIP? Versatile Interface Processor FunctionsDram VIP Hardware Prerequisites What is the Cisco 7000 Family?VIP Software Prerequisites Cisco 7000 Series Cisco 7000, Interface Processor EndCisco 7500 Series Cisco 7010, Interface Processor EndCisco 7507, Interface Processor End Cisco 7513, Interface Processor End VIP Port Adapter Hardware Configuration Overview List of Parts and Tools VIP Installation PrerequisitesVIP Microcode Overview Safety Guidelines Electrical Equipment GuidelinesOnline Insertion and Removal-An Overview Versatile Interface Processor Functions H1984 Removing a VIP VIP InstallationRemoving an Interface Processor Filler Captive installation screws Installing a VIP Checking the Installation and Verifying VIP Status Checking the VIP InstallationVersatile Interface Processor Functions Verifying VIP Status Using show Commands Router# show controller cbus Upgrading VIP Microcode Router# show flash Loaded from Flash Upgrading and Replacing Dram SIMMs Handling a Dram SIMM-Example OnlyDram Removing and Replacing Dram SIMMs FE-TX Port Adapter Fast Ethernet OverviewVIP Port Adapter Functions Dram FE-TX Port Adapter LEDs MIIConnector FE-TX Port Adapter Receptacles, Cables, and PinoutsReceive Data + RxD+ FE-TX MII Connection, Receptacle Attaching FE-TX Port Adapter Interface Cables Configuring the FE-TX Interface Attaching the Ferrite Bead around the RJ-45 CableVIP Port Adapter Functions Fast Ethernet Interface Port Number Example Cisco 7505 Shown VIP Port Adapter Functions Configuring the FE-TX Port Adapters-Descriptions and Examples Router# configure terminal Router# show version 4E Port Adapter Ethernet 10BASE-T Overview4E Port Adapter Description and 10BASE-T Specifications Cable Specifications for 10-Mbps 10BASE-T Parameter RJ-45 4E Port Adapter LEDs 4E Port Adapter Receptacles, Cables, and PinoutsReceive Data + RxD+ Attaching 4E Port Adapter Interface Cables Configuring the 4E Interfaces VIP Port Adapter Functions 10BASE-T Interface Port Number Example Cisco 7505 Shown Router# sh int e 3/1/0 Slot Adapter Port n Slot Adapter Port Port n Router# show version Selv Circuit Warning Translations Cisco Information Online