Cisco Systems VIP-FE-TX/4E manual Dram

VIP Port Adapter Functions

FE-TX Port Adapter Description and Fast Ethernet Specifications

The FE-TX port adapter is available in the following VIP configurations: FE-TX/blank, FE-TX/4E, or FE-TX/FE-TX. (For a description of the 4E port adapter, refer to the section “4E Port Adapter” on page 44.) Figure 14 shows VIP-FE-TX/4E. The FE-TX and 4E port adapters have a handle attached, but this handle is not shown to allow a full view of detail on each port adapter’s faceplate.

Figure 14 VIP with One FE-TX and One 4E Port Adapter Installed (Horizontal Orientation Shown)

	Bus connector
Microcode	Port adapter
	handles not shown
Flash U17	U2
DRAM	U1
SIMMs
FE-TX in	4E in port
	adapter
port adapter	slot 1
slot 0

FAST ETHERNET

0

MII LINK RJ45

0 1 2 3

1	LINK
	3
0	2

ETHERNET-10BT

H4711

Caution To prevent system problems, do not remove port adapters from the VIP motherboard, or attempt to install other port adapters on the VIP motherboard.

VIP-FE-TX/4E Installation and Configuration 31