Cisco Systems EPC3827 Access Restrictions User Setup Page Description, User Settings, Password

Control Access to the Gateway

Select the User Setup tab to open the Access Restrictions User Setup page.

Access Restrictions User Setup Page Description

Use the descriptions and instructions in the following table to configure the user setup for your residential gateway. After you make your selections, click Save Settings to apply your changes or Cancel Changes to cancel.

Section	Field Description
User	Add User
Configure	Allows you to add a new user profile. Enter the name of the user and
	click the Add User button to add the user to the list.
	User Settings
	Allows you to edit a user profile by using the drop-down menu to edit a
	user profile. The drop-down menu allows you to recall the profile to be
	edited. User names and passwords are case-sensitive.
	Make sure to check the Enable box to activate the user profile. If a
	profile is not active, that user will not have any access to the Internet.
	To remove a user profile, use the drop-down menu to select the user to
	be removed and click the Remove User button.
	Password
	Enter the selected user's password in this field. Each user must enter
	their User Name and Password each time they use the Internet. User
	names and passwords are case-sensitive.
	Note: The residential gateway will allow each user access to the Internet,
	subject to the rules selected on this page for that user.
	Re-Enter Password
	Re-enter the same password for confirmation of the password in the
	previous field.

4025083 Rev A 51