| How Do I Configure My DOCSIS Residential Gateway? | |
Section | Field Description |
|
Remote Secure | Select the desired option, IP Addr., Any, or FQDN. If the remote | |
Gateway | gateway has a dynamic IP address, select Any or FQDN. If Any is | |
| selected, then the Gateway will accept requests from any IP address. | |
| FQDN | |
| If FQDN is selected, enter the domain name of the remote gateway, | |
| so the Gateway can locate a current IP address using DDNS | |
| IP | |
| The IP address in this field must match the public (WAN or Internet) | |
| IP address of the remote gateway at the other end of this tunnel | |
|
|
|
Key Management | Key Exchange Method | |
| The gateway supports both automatic and manual key | |
| management. When automatic key management is selected, Internet | |
| Key Exchange (IKE) protocols are used to negotiate key material for | |
| Security Association (SA). If manual key management is selected, no | |
| key negotiation is needed. Basically, manual key management is | |
| used in small static environments or for troubleshooting purposes. | |
| Note that both sides must use the same key management method. | |
|
|
|
4025083 Rev A | 41 |