Cisco Systems DPC3827 Field Description Subnet Mask, Default Gateway, Primary DNS, Secondary DNS

Manage the Gateway
	Field	Description
		Subnet Mask
		Enter the gateway’s subnet mask (as seen from the Internet,
		including your service provider)
		Default Gateway
		Enter the default gateway of the service provider’s server
		Primary DNS
		Enter the primary domain name server IP address(es) provided by
		your service provider. This is required.
		Secondary DNS
		Enter the secondary domain name server IP address(es) provided
		by your service provider. This is optional.
	MTU	MTU size
		MTU is the Maximum Transmission Unit. The MTU size specifies
		the largest packet size permitted for Internet transmission. Select
		Manual if you want to manually enter the largest packet size that
		will be transmitted. 1500 is the recommended size. You should
		leave this value in the 1200 to 1500 range. To have the device select
		the best MTU for your Internet connection. The factory default = 0
		(automatic)
	Gateway Access	Current User Name:
	Local Access	Identifies the currently logged in user
		Change Current User Name to:
		This field allows you to change your user name. If you want to
		change your user name, enter your new user name in this field and
		click Save Settings to apply the change.
		Note: The factory default user name is a blank field.
		Change Password to:
		This field allows you to change your password. If you want to
		change your password, enter your new password in this field.
		Then, re-enter your new password in the Re-Enter New Password
		field and click Save Settings to apply the change.
		Note: The factory default password is a blank field.
		Re-Enter New Password:
		Allows you to re-enter the new password. You must enter the same
		password as the one entered in the previous field Change
		Password to. After you re-enter your new password, click Save
		Settings to apply the change.

58 4025083 Rev A