Cisco Systems 6500 manual Crypto pki import pem, Exportable

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

crypto pki import pem

crypto pki import pem

To import a PEM-formatted file to the WebVPN Services Module, use the crypto pki import pem command.

crypto pki import trustpoint_label pem [exportable] {terminal url url usage-keys}pass_phrase

Syntax Description	trustpoint-label	Name of the trustpoint.
	exportable	(Optional) Specifies the key that can be exported.
	terminal	Displays the request on the terminal.
	url url	Specifies the URL location. Valid values for url are as follows:
			• archive:—Imports from archive: file system.
			• flash:—Imports from flash: file system.
			• ftp:—Imports from the FTP: file system.
			• http:—Importsfrom HTTP: file system.
			• https:—Imports from HTTPS: file system.
			• null:—Imports from the NULL: file system.
			• nvram:—Imports from the NVRAM: file system.
			• rcp:—Imports from the RCP: file system.
			• scp:—Imports from the SCP: file system.
			• system:—Imports from the system: file system.
			• tftp:—Imports from the TFTP: file system.
	usage-keys	Specifies that two special-usage key pairs should be generated, instead of
		one general-purpose key pair.
	pass_phrase	Pass phrase.
Defaults	This command has no default settings.
Command History	Global configuration
Command History	Release		Modification
	WebVPN Services		Support for this command was introduced on the Catalyst 6500 series
	Module Release 1.1		switches.

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01 2-21