Cisco Systems 6500 manual Url-list listname no url-list listname, Heading text

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

url-list

url-list

To enter the URL submode to configure the URL lists, use the url-listcommand. Use the no form of this command to remove the given list from the configuration.

url-list listname no url-list listname

Syntax Description	listname	Name for the URL list.
Defaults	This command has no default settings.
Command Modes	WebVPN context submode
Command History	Release	Modification
	WebVPN Module	Support for this command was introduced on the Catalyst 6500 series
	Release 1.1	switches.
Usage Guidelines	The listname argument is case-sensitive and can be a maximum of 64 characters.
	After you enter the url-listcommand, the prompt changes to the following:
	webvpn(config-webvpn-url)#
	After you enter the URL submode, there are commands available to configure the URL lists. Table 2-6
	lists the URL submode commands.
Table 2-6 URL Submode Commands
Command		Purpose and Guidelines	Default
exit		Exits WebVPN URL submode and returns to WebVPN context
		submode.
heading text		Specifies the heading text for the group of URLs. Enclose the
		text value within quotation marks if the heading includes any
		spaces.
		You can specify only one heading per list name.
url-text text url-value url[/exchage]		Specifies the text the user sees for the link on their home page;
		the text must be unique within a given listname. Enclose the text
		value within quotation marks if the text includes any spaces.

The url-valueurl keyword and argument specifies the URL that the link goes to. To use Outlook Web Access (OWA) for web-based email, append the URL with the /exchange keyword (requires authentication to an Exchange server).

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

2-76 OL-7310-01