Cisco Systems 6500 manual Crypto key export rsa pem, Terminal, Url url, 3des, Des

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

crypto key export rsa pem

crypto key export rsa pem

To export a PEM-formatted RSA key to the WebVPN Services Module, use the crypto key export rsa pem command.

crypto key export rsa keylabel pem {terminal url url} {{3des des} pass_phrase}

Syntax Description	keylabel	Name of the key.
	terminal	Displays the request on the terminal.
	url url	Specifies the URL location. Valid values for url are as follows:
		• archive:—Exports to archive: file system
		• flash:—Exports to flash: file system
		• ftp:—Exports to ftp: file system
		• http:—Exports to http: file system
		• https:—Exports to https: file system
		• null:—Exports to null: file system
		• nvram:—Exports to nvram: file system
		• rcp:—Exports to rcp: file system
		• scp:—Exports to scp: file system
		• system:—Exports to system: file system
		• tftp:—Exports to tftp: file system
	3des	Specifies the 168-bit DES (3DES) encryption algorithm.
	des	Specifies the 56-bit DES-CBC encryption algorithm.
	pass_phrase	Pass phrase.
Defaults	This command has no default settings.

Command Modes

Command History

Global configuration

Release	Modification
WebVPN Services	Support for this command was introduced on the Catalyst 6500 series
Module Release 1.1	switches.

Usage Guidelines The pass phrase can be any phrase including spaces and punctuation except for a question mark (?), which has special meaning to the Cisco IOS parser.

Pass-phrase protection associates a pass phrase with the key. The pass phrase is used to encrypt the key when it is exported. When this key is imported, you must enter the same pass phrase to decrypt it.

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01 2-7