Cisco Systems 6500 manual Port-forward listname no port-forward listname, Default local-port

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

port-forward

port-forward

To enter the port-forwarding submode and configure port-forwarding entries, use the port-forwardcommand. Use the no form of this command to remove the given list from the configuration.

port-forward listname no port-forward listname

Syntax Description	listname	Name for list of forwarded ports.
Defaults	This command has no default settings.
Command Modes	WebVPN context submode
Command History	Release	Modification
	WebVPN Module	Support for this command was introduced on the Catalyst 6500 series
	Release 1.1	switches.
Usage Guidelines	The listname argument is case-sensitive and can be a maximum of 64 characters.
	After you enter the port-forwardcommand, the prompt changes to the following:
	webvpn(config-webvpn-port-fwd)#

After you enter the port-forward submode, there are commands available to configure the port-forwarding services. Table 2-4lists the port-forwarding submode commands.

Table 2-4 Port-Forwarding Submode Commands

Command	Purpose and Guidelines	Defaults
default local-port	Specifies the default local port; valid values are from 1 to 65535.
port-number
exit	Exits WebVPN port-fwd submode and returns to WebVPN context
	submode.

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01 2-41