Cisco Systems 6500 manual Nbns-list name no nbns-list name

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

nbns-list

nbns-list

To enter the nbnslist submode and configure NetBIOS Name Service (NBNS) servers, use the nbns-listcommand. Use the no form of this command to remove the specified list from the configuration.

nbns-list name no nbns-list name

Syntax Description	name	Name for the NBNS list.
Defaults	This command has no default settings.
Command Modes	WebVPN context submode
Command History	Release	Modification
	WebVPN Module	Support for this command was introduced on the Catalyst 6500 series
	Release 1.1	switches.
Usage Guidelines	The listname argument is case-sensitive and can be a maximum of 64 characters.
	After you enter the nbns-listcommand, the prompt changes to the following:
	webvpn(config-webvpn-nbnslist)#

After you enter the nbnslist submode, there are commands available to configure the NBNS servers. Table 2-4lists the nbnslist submode commands.

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

2-36 OL-7310-01