Cisco Systems 7600 SERIES manual 32 A@42, With CFC 1q8t/1p3q8t

Supported Hardware

Gigabit Ethernet Switching Modules

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
WS-X6748-SFP	5.32 A@42 V	48-portGigabit Ethernet SFP

•CEF720 with WS-X6700-CFC(adds 0.75 A@42 V)

•dCEF720 with WS-F6700-DFC3BXL(adds 3.30 A@42 V)

•dCEF720 with WS-F6700-DFC3B(adds 3.00 A@42 V)

•Supports egress multicast replication

•QoS architecture:

–With DFC3: 2q8t/1p3q8t

–With CFC: 1q8t/1p3q8t

•Number of ports: 48

Number of port groups: 4 Port ranges per port group:

1,	3,	5,	7,	9, 11, 13, 15, 17, 19, 21, 23
2,	4,	6,	8, 10, 12, 14, 16, 18, 20, 22, 24
25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47
26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48
	Supported only with Supervisor Engine 720				12.2(33)SRA

Note

•WS-X6748-SFP requires one of the following:

–WS-F6700-DFC3BXL(3.30 A@42 V)

–WS-F6700-DFC3B(3.00 A@42 V)

–WS-X6700-CFC(0.75 A@42 V)

•WS-X6748-SFP ships with WS-X6700-CFCinstalled unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.

•WS-X6748-SFP is supported in the WS-C6503-Echassis.

•WS-X6748-SFP is not supported in the WS-C6503and CISCO7603 chassis.

•In a 13-slot chassis, WS-X6748-SFP is supported only in slots 9 through 13 and does not power up in other slots.

•On WS-X6748-SFP ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6748-SFP ports that interconnect network devices.

•See the “Small Form-Factor Pluggable Modules (SFPs)” section on page 26.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

22 OL-10362-06