Page 31
Supported Hardware
10/100/1000 Ethernet Switching Modules
Product ID | Power | | | Minimum |
(append “=” for spares) | Required | Product Description | Software Version |
| | | |
WS-X6748-GE-TX | 7.00 A@42 V | 48-port 10/100/1000 RJ-45 | |
| | • CEF720 with WS-X6700-CFC(adds 0.75 A@42 V) | |
| | |
| | • dCEF720 with WS-F6700-DFC3BXL(adds 3.30 A@42 V) | |
| | • dCEF720 with WS-F6700-DFC3B(adds 3.00 A@42 V) | |
| | • Supports egress multicast replication | |
| | • QoS architecture: | |
| | – | With DFC3: 2q8t/1p3q8t | |
| | – | With CFC: 1q8t/1p3q8t | |
| | • Number of ports: 48 | |
| | Number of port groups: 4 | |
| | Port ranges per port group: 1–12, 13–24, 25–36, 37–48 | |
| | | | |
| | | Supported only with Supervisor Engine 720 | 12.2(33)SRA |
| | | | |
Note | | | | |
•WS-X6748-GE-TX requires one of the following:
–WS-F6700-DFC3BXL(3.30 A@42 V)
–WS-F6700-DFC3B(3.00 A@42 V)
–WS-X6700-CFC(0.75 A@42 V)
•WS-X6748-GE-TX ships with WS-X6700-CFCinstalled unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.
•WS-X6748-GE-TX is supported in the WS-C6503-Echassis.
•WS-X6748-GE-TX is not supported in the WS-C6503and CISCO7603 chassis.
•In a 13-slot chassis, WS-X6748-GE-TX is supported only in slots 9 through 13 and does not power up in other slots.
•On WS-X6748-GE-TX ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6748-GE-TX ports that interconnect network devices.
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
