Page 48
Supported Hardware
Circuit Emulation over Packet (CEoP) SPAs
Product ID | | | Minimum |
(append “=” for spares) | SIP Support | Product Description | Software Version |
| | | |
SPA-2CHT3-CE-ATM | 7600-SIP-400 | 2-Port Channelized T3/E3 ATM CEoP SPA | 12.2(33)SRC |
| | | |
Note The SPA-2CHT3-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel.
SPA-1CHOC3-CE-ATM | 7600-SIP-400 | 1-Port Channelized OC-3 STM1 ATM CEoP SPA | 12.2(33)SRB |
| | | |
| | SFP Modules Supported in SPA-1XCHOC3-CE | |
| | | |
| | SFP-OC3-MM | 12.2(33)SRB |
| | | |
| | SFP-OC3-IR1 | 12.2(33)SRB |
| | | |
| | SFP-OC3-LR1 | 12.2(33)SRB |
| | | |
| | SFP-OC3-LR2 | 12.2(33)SRB |
| | | |
| | SFP-OC3-SR | 12.2(33)SRB |
| | | |
SPA-24CHT1-CE-ATM | 7600-SIP-400 | 24-Port Channelized T1/E1/J1 ATM CEoP SPA | 12.2(33)SRB |
| | | |
Note The SPA-24CHT1-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel.
Services SPA Carrier (SSC)
Product ID | Power | | Minimum |
(append “=” for spares) | Required | Product Description | Software Version |
| | | |
7600-SSC-400 | 5.43 A@42 V | Services SPA Carrier (SSC) | 12.2(33)SRA |
| | | |
Note | | | |
•7600-SSC-400 does not maintain state when an NSF with SSO redundancy mode switchover occurs.
•Supervisor Engine 720 and Supervisor Engine 32 support the 7600-SSC-400 beginning with Cisco IOS Release 12.2(33)SRA .
•Route Switching Processor 720-1GE supports the 7600-SSC-400 beginning with Cisco IOS Release 12.2(33)SRC .
Services SPAs
Product ID | | | Minimum |
(append “=” for spares) | Carrier | Product Description | Software Version |
| | | |
IPSEC-SPA-2G | | IPSec SPA | 12.2(33)SRA |
| | | |
Note The IPSEC-SPA-2G supports the Route Switching Processor 720 beginning with Cisco IOS Release 12.2(33)SRC.
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR