Cisco Systems 7600 SERIES manual Application Control Engine ACE Module

Supported Hardware

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
WS-SVC-NAM-1	2.89 A@42 V	Network Analysis Module 1; CEF256
		With Supervisor Engine 720	12.2(33)SRA
		With Supervisor Engine 32	12.2(33)SRA
		With Route Switching Processor 720-1GE	12.2(33)SRC
Note

•WS-SVC-NAM-2 and WS-SVC-NAM-1 run their own software—See this publication for more information: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_15353.htm

•WS-SVC-NAM-2 and WS-SVC-NAM-1 have been tested with OSM-2+4GE-WAN+and the OC-12 Packet-over-SONET OSMs.

Application Control Engine (ACE) Module

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
ACE10-6500-K9	5.23 A@42 V	Application Control Engine (ACE) module
		With Supervisor Engine 720	12.2(33)SRB
		With Route Switching Processor 720-1GE	12.2(33)SRC
ACE20-SBC-K9	5.23 A@42 V	Cisco 7600 Series ACE 20 HW for Session Border Controller
		With Supervisor Engine 720	12.2(33)SRB1
		With Route Switching Processor 720-1GE	12.2(33)SRC

•ACE10-6500-K9 runs its own software—See these publications:

•http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/ace/index.htm

•See the ACE10-6500-K9 software release notes for information about the minimum required ACE10-6500-K9 software version.

Note

•Cisco IOS Software modularity does not support ACE10-6500-K9.

•Supervisor Engine 32 does not support ACE10-6500-K9.

Service Application Module for IP

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
WS-SVC-SAMI-BB	7.14 A@42 V	Cisco Service and Application Module IP
		With Supervisor Engine 720-3BXL	12.2(33)SRB
		With Supervisor Engine 32	12.2(33)SRC
		With Route Switching Processor 720-1GE	12.2(33)SRC
		Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
OL-10362-06				57