Cisco Systems 7600 SERIES manual Ethernet Switching Modules, Optical Services Modules OSMs

Supported Hardware

Ethernet Switching Modules

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
WS-X6024-10FL-MT	1.52 A@42 V	24-port 10BASE-FL MT-RJ
		• QoS port architecture (Rx/Tx): 1q4t/2q2t
		• Number of ports: 24
		Number of port groups: 2
		Port ranges per port group: 1–12, 13–24
		With Supervisor Engine 720	12.2(33)SRA
		With Supervisor Engine 32	12.2(33)SRA

Optical Services Modules (OSMs)

•OSM Guidelines and Restrictions, page 39

•Gigabit Ethernet WAN, page 40

•OC-48 Packet over SONET, page 40

•OC-48 DPT/Packet over SONET, page 40

•OC-12 Packet over SONET, page 40

•OC-3 Packet over SONET, page 41

•OC-12 Channelized, page 41

•CT3/T1 Channelized/Unchannelized, page 41

•OC-12 ATM, page 42

OSM Guidelines and Restrictions

•Supervisor Engine 32 does not support OSMs.

•OSMs require a minimum of 128 MB of synchronous dynamic random-access memory (SDRAM) —Refer to this publication for memory upgrade procedures:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/hardware/osmodule/app_upgr.htm

•OSMs are CEF256 modules.

•OSM WAN port numbering starts with 1.

•On OSMs with Gigabit Ethernet GBIC Layer 2 LAN ports:

–OSM LAN port numbering starts with 1.

–The LAN ports are in a single port group.

•The OSM-2+4GE-WAN+and the OC-12 Packet-over-SONET OSMs have been tested with the service modules and WS-SUP720.

•OSMs are not supported in the Cisco 7604 or in any S-series chassis.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

OL-10362-06 39