Cisco Systems 7600 SERIES manual RSP720-3C-GE, QoS port architecture Rx/Tx is 1p1q4t/1p2q2t

Supported Hardware

•QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t

RSP720-3C-GE

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
RSP720-3C-GE	6.66 A@42 V	Route Switch Processor 720 with PFC3C:	12.2(33)SRB
		• Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps
		small form pluggable (SFP) module; port 2 is configurable
		with either a 1-Gbps SFP module or a 10/100/1000-Mbps
		RJ-45
		• Integrated 720-Gbps switch fabric
		• PFC3C and MSFC4 with 512-MB bootflash, 4-MB
		NVRAM, 4-MB ROMMON, and several DRAM options:
		– Route processor (RP): 1- to 4-GB DRAM (default 1
		GB)
		– Switch processor (SP): 1- to 2-GB DRAM (default 1
		GB)
		• 2 CompactFlash Type II slots (on front panel) and 2-GB
		internal CompactFlash (1 GB each for RP and SP)
		• Requires larger power supplies and a high-speed fan tray
		• QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t
Note

•There are no memory-only upgrade options for RSP720-3C-GE.

•The following hardware and features are not supported by the RSP720-3C-GE:

–CISCO7603 router, OSR-7609 router.

–Optical Service Modules (OSMs), FlexWAN module (Enhanced FlexWAN module is supported).

–In-service software upgrade (ISSU) is not supported in Cisco IOS Release 12.2SRB.

–Server load balancing (SLB) is not supported.

•The RSP720-3C-GE supports the IPSEC-SPA-2G beginning with Cisco IOS Release 12.2(33)SRC.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

8 OL-10362-06