Cisco Systems 7600 SERIES manual 23 A@42, PortGigabit Ethernet SFP

Supported Hardware

Product ID	Power			Minimum
(append “=” for spares)	Required	Product Description		Software Version
WS-X6724-SFP	2.23 A@42 V	24-portGigabit Ethernet SFP
		• CEF720 with WS-X6700-CFC(adds 0.75 A@42 V)
		• dCEF720 with WS-F6700-DFC3BXL(adds 3.30 A@42 V)
		• dCEF720 with WS-F6700-DFC3B(adds 3.00 A@42 V)
		• Supports egress multicast replication
		• QoS architecture:
		–	With DFC3: 2q8t/1p3q8t
		–	With CFC: 1q8t/1p3q8t
		• Number of ports: 24
		Number of port groups: 2
		Port ranges per port group: 1–12, 13–24
			Supported only with Supervisor Engine 720	12.2(33)SRA
Note

•WS-X6724-SFP requires one of the following:

–WS-F6700-DFC3BXL(3.30 A@42 V)

–WS-F6700-DFC3B(3.00 A@42 V)

–WS-X6700-CFC(0.75 A@42 V)

•WS-X6724-SFP ships with WS-X6700-CFCinstalled unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.

•WS-X6724-SFP is supported in the WS-C6503-Echassis.

•WS-X6724-SFP is not supported in the WS-C6503and CISCO7603 chassis.

•On WS-X6724-SFP ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6724-SFP ports that interconnect network devices.

•See the “Small Form-Factor Pluggable Modules (SFPs)” section on page 26.

WS-X6816-GBIC

3.84 A@42 V

16-port Gigabit Ethernet GBIC

•dCEF256

•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1–8, 9–16
With Supervisor Engine 720	12.2(33)SRA

Note

•WS-X6816-GBIC requires one of these for use with Supervisor Engine 720:

–WS-F6K-DFC3BXL(adds 1.47 A@42 V)

–WS-F6K-DFC3B(adds 1.67 A@42 V)

•In a 13-slot chassis, WS-X6816-GBIC is supported only in slots 9 through 13 and does not power up in other slots.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

OL-10362-06 23