Cisco Systems 7609 manual System Features, Bandwidth and Port Density

Chapter 1 Product Overview

System Features

The Cisco 7609 Internet Router supports the following:

•A Supervisor Engine 2 with MSFC2 and a PFC2, and an optional redundant Supervisor Engine 2 with MSFC2 and a PFC2. Each supervisor engine has two Gigabit interface uplinks.

Note The uplink ports are fully functional on the redundant supervisor engine in standby mode.

Note Both supervisor engines in a single chassis must be completely identical.

•Backplane bandwidth scalable up to 256 Gbps when using the Switch Fabric Module (WS-C6500-SFM)

•Up to eight additional OSMs or Catalyst 6000 family modules

•Hot-swappable fan assembly and modules

•Redundant AC-input or DC-input power supplies

System Features

This section describes the hardware features for the Cisco 7609 Internet Router. For software descriptions, refer to the Cisco 7600 Series Internet Router Software Configuration Guide. For module descriptions and installation procedures, refer to the Cisco 7600 Series Internet Router Module Installation Guide.

Bandwidth and Port Density

Table 1-1lists the bandwidth and port densities of the Cisco 7609 Internet Router.

	Cisco 7609 Internet Router Installation Guide
1-6	OL-5079-04