Consumer
Defined Control | START |
Feat ure s |
|
FEATURE | CLOCK |
OVERVIEW |
|
Silent Control | TS_ |
Operation |
|
| _llEN |
| TIMEn |
| 0N/0FF |
Setting Silent | Control Operation |
| |
The STOP TIME | @ | and CLEAN (_ | pads control the Silent Control operation feature. The Silent Control operation |
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS | PRESS | DISPLAY |
To change control from normal sound operation to silent control operation:
1.To tell if your range is set for normal or silent operation press
| and hold @ | for 7 seconds. "DELAY" will appear | and flash | for 7seconds |
|
| in the display (Fig. 1). If ":SP" appears (Fig. 2), the control will | Figure | 1 | ||
| operate with normal sounds and beeps. If":- | ||||
|
|
| |||
| the control is in the silent operation mode. |
|
|
| |
2. | Press _ | to switch between normal sound operation and |
|
| |
| silent operation mode. The display wilt show either ":SP" (Fig. 2) | Figure | 2 | ||
| or |
| |||
|
|
|
| ||
4. | Press _ | to accept the change or press _ | to reject the |
|
|
| change. |
|
|
|
|
|
|
|
| Figure | 3 |
19