Consumer Defined Control Features
FEATURE OVERVIEW
Oven Lockout
Temperature Display
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout Feature
The (_ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the Warmer Drawer and ESEC Control from being turned on. It does not disable the clock, Kitchen Timer,
Warmer Zone or the interior oven lights.
|
| INSTRUCTIONS | PRESS | DISPLAY | |
To activate the Oven | Lockout feature: |
|
| ||
1. | Press and hold | (_ | for three seconds (Fig. 1). | (_for3seconds |
|
|
| ||||
2. | After 3 seconds | the lock icon light ( I1_ ) wilt appear, | a beep will | Figure 1 |
sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the lock icon light.
To | reactivate | normal | oven | operation: |
|
| ||
1. | Press and hold (_ | for three | seconds. A beep wilt sound. | (_for3seconds | ||||
| ||||||||
| The "DOOR LOCKED" will continue to flash until the oven door |
| ||||||
| has completely unlocked and the lock icon light ( I1_ ) will clear |
| ||||||
| (See | Fig. 2). |
|
|
|
|
| |
2. | The | range | is again fully | operational. |
|
| ||
Setting | Temperature | Fahrenheit | or Celsius |
| ||||
The BROIL (_ | and CLEAN | (_ | pads control the Fahrenheit or Celsius |
temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.
INSTRUCTIONSPRESS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
1.To tell if the display is set for Fahrenheit or Celsius press
(_ | (Fig. 3) and hold for 7 seconds. A beep will then sound. | (_)for7seconds |
If "F" appears, the display is set to show temperatures in Fahrenheit (Fig. 4). If "C" appears, the display is set to show temperatures in Celsius (Fig. 5).
2.Press (_) to switch between Fahrenheit or Celsius display modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).
3. Press _ | to accept the change or press _ | to reject the |
change.
Figure 2
DISPLAY
Figure 3
Figure 4
Figure 5
18