Kenmore 790.99013 Adjusting Oven Temperature, Oven Cleaning, Press, Display, Feature Overview

Oven Cleaning

FEATURE OVERVIEW

Delayed Self-Clean Cycle (Cont'd)

INSTRUCTIONS PRESS DISPLAY

Stopping or Interrupting a Self-Cleaning Cycle:

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press _.

2.Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened (Fig. 2-1).

Figure 2-1

Adjusting Oven Temperature

FEATURE OVERVIEW

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to fellow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a

temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

Note: The oven

temperature adjustments made with this feature wilt

not change the Self-Clean cycle temperature.

			INSTRUCTIONS				PRESS	DISPLAY
To adjust the oven temperature higher:
1.	Press _	for 6 seconds (Fig. 1).
2. To increase the temperature use the number pads to enter the								Figure	1
	desired	change.	(Example 30°F) _	_	(Fig.	2). The	O
	temperature may be increased as much as 35°F (17°C).
3.	Press _	to accept the temperature		change	and the display			Figure	2
	will return to the		time of day (Fig. 3). Press _		to	reject the
	change	if necessary.						Figure	3

To adjust the oven temperature lower:

1. Press _ for 6 seconds (Fig.4).

2.TO decrease the temperature use the number pads to enter the

desired	change- (Example -30°F) @	@	and then	@@@
press (_	(Fig. 5). The temperature	may be decreased		as
much as 35°F (17°C).
3. Press _	to accept the temperature	change	and the display
will return to the time of day (Fig. 6). Press _			to reject	the
change	if necessary.

Figure 4

Figure 5

Figure 6

3O