Cisco Systems 7304 manual A P T E R, 13-1

Page 1

C H A P T E R 13

Configuring the 2-Port and 4-Port T3/E3 SPAs

This chapter provides information about configuring the 2-Port and 4-Port T3/E3 Shared Port Adapters (SPAs) on the Cisco 7304 router. It includes the following sections:

Configuration Tasks, page 13-1

Verifying the Interface Configuration, page 13-17

Configuration Examples, page 13-19

For information about managing your system images and configuration files, refer to the Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 and Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 publications.

For more information about the commands used in this chapter, see Chapter 18, “Command Reference,” in this guide, which documents new and modified commands. Also refer to the related Cisco IOS Release 12.2 software command reference and master index publications. For more information about accessing these publications, see the “Related Documentation” section on page -xivsection of this document.

Configuration Tasks

This section describes how to configure the 2-Port or 4-Port T3/E3 SPA for the Cisco 7304 router and includes information about verifying the configuration.

It includes the following topics:

Required Configuration Tasks, page 13-2

Specifying the Interface Address on a SPA, page 13-5

Optional Configurations, page 13-5

Saving the Configuration, page 13-17

Cisco 7304 Router Modular Services Card and Shared Port Adapter Software Configuration Guide

 

OL-4807-02

13-1

 

 

 

Image 1
Contents 13-1 A P T E RSetting the Card Type Required Configuration TasksRouter# configure terminal 13-2Verifying Controller Configuration Configure the InterfaceInternal line 13-313-4 Verifying Interface ConfigurationRouter# show controllers serial 6/0/2 brief Routerconfig# interface serial 3/0/0 Optional ConfigurationsSpecifying the Interface Address on a SPA 13-513-6 Configuring Data Service Unit Mode13-7 Verifying DSU ModeRouterconfig# interface serial slot/subslot/port Configuring Maintenance Data Link13-8 Transmit idle-signal path test-signal Routerconfig-if#mdl string eic ficGenerator lic pfi port unit string 13-9Verifying MDL Configuring Scramble13-10 Scrambling is enabled Verifying Scramble Configuration13-11 Verifying Framing Configuration Configuring FramingM13 G832Routerconfig-if# encapsulation hdlc ppp Configuring EncapsulationVerifying Encapsulation Frame-relayVerify Cable Length Setting Configuring Cable Length13-14 Router# show interfaces serial 4/0/0 Serial4/0/0Configuring the Trace Trail Buffer Configuring Invert DataVerify Invert Data Setting 13-15Routerconfig-if# ttb country rnode serial Verify TTB SettingsSnode soperator x string 13-16Verifying Per-Port Interface Status Saving the Configuration13-17 13-18 Monitoring Per-Port Interface StatisticsShow controller serial 5/0/2 Serial5/0/2 MDL Configuration Example DSU Configuration Example13-19 Framing Configuration Example Scrambling Configuration ExampleEncapsulation Configuration Example Cable Length Configuration ExampleTrace Trail Buffer Configuration Example Invert Data Configuration Example13-21 13-22
Related manuals
Manual 70 pages 34.39 Kb