Cisco Systems 7304 manual Scrambling Configuration Example, Framing Configuration Example, 13-20

Chapter 13 Configuring the 2-Port and 4-Port T3/E3 SPAs

Configuration Examples

Router(config-if)# mdl transmit path

Router(config-if)# mdl transmit idle-signal

Router(config-if)# mdl transmit test-signal

Scrambling Configuration Example

The following example configures scrambling on the T3/E3 interface:

!Enter global configuration mode

Router# configure terminal

!Specify the serial interface and enter interface configuration mode

Router(config)# interface serial 4/1/3

!Enable scrambling

!

Router(config-if)# scrambling

Framing Configuration Example

The following example configures framing on interface port 1 on slot 4, subslot 1.

!Specify the serial interface and enter interface configuration mode

Router(config)# interface serial 4/1/1

!Specify the framing method

!

Router(config-if)# framing m13

Encapsulation Configuration Example

The following example configures encapsulation on interface port 1 on slot 4, subslot 1.

!Specify the serial interface and enter interface configuration mode

Router(config)# interface serial 4/1/1

!Specify the encapsulation method

!

Router(config-if)# encapsulation PPP

Cable Length Configuration Example

The following example configures sets the cable length to 200 feet:

!Enter global configuration mode

Router# configure terminal

!Specify the serial interface and enter interface configuration mode

Router(config)# interface serial 4/1/3

	Cisco 7304 Router Modular Services Card and Shared Port Adapter Software Configuration Guide
13-20	OL-4807-02