Cisco Systems 7304 manual DSU Configuration Example, MDL Configuration Example, 13-19

Chapter 13 Configuring the 2-Port and 4-Port T3/E3 SPAs

Configuration Examples

No FEAC code is being received

MDL transmission is disabled

Configuration Examples

This section includes the following configuration examples:

•DSU Configuration Example, page 13-19

•MDL Configuration Example, page 13-19

•Scrambling Configuration Example, page 13-20

•Framing Configuration Example, page 13-20

•Encapsulation Configuration Example, page 13-20

•Cable Length Configuration Example, page 13-20

•Invert Data Configuration Example, page 13-21

•Trace Trail Buffer Configuration Example, page 13-21

DSU Configuration Example

The following example confgiures DSU on interface port 0 on slot 4, subslot 1.

!Specify the serial interface and enter interface configuration mode

Router(config)# interface serial 4/1/0

!Specify the DSU mode

!

Router(config-if)# dsu mode 0

!

!Specify the DSU bandwidth

Router(config-if)# dsu bandwidth 10000

!Set the DSU bandwidth to accept or reject the incoming remote requests

Router(config-if)# dsu remote accept

MDL Configuration Example

The following example configures the MDL strings on interface port 0 on slot 4, subslot 1.

!Specify the serial interface and enter interface configuration mode

Router(config)# interface serial 4/1/0

!Specify the MDL strings

!

Router(config-if)# mdl string eic beic Router(config-if)# mdl string lic beic Router(config-if)# mdl string fic bfix Router(config-if)# mdl string unit bunit Router(config-if)# mdl string pfi bpfi Router(config-if)# mdl string port bport Router(config-if)# mdl string generator bgen

	Cisco 7304 Router Modular Services Card and Shared Port Adapter Software Configuration Guide
OL-4807-02		13-19