Cisco Systems 7304 Routerconfig-if#mdl string eic fic, Generator lic pfi port unit string, 13-9

Chapter 13 Configuring the 2-Port and 4-Port T3/E3 SPAs

		Configuration Tasks
	Command	Purpose
	Router(config-if)#mdl [string {eic fic	Configures the Maintenance Data Link (MDL)
	generator lic pfi port unit} string}]	message.
	[transmit {idle-signal path test-signal}]	• eic string—Equipment identification code (up
		to 10 characters), which is a value used to
		describe a specific piece of equipment
		according to ANSI T1.107-1995.
		• fic string—Frame identification code (up to 10
		characters), which is a value used to identify
		where the equipment is located within a
		building at a given location according to ANSI
		T1.107-1995.
		• generator string—Specifies the Generator
		number string sent in the MDL Test Signal
		message; can be up to 38 characters.
		• lic string—Location identification code (up to
		11 characters), which is a value used to
		describe a specific location according to ANSI
		T1.107-1995.
		• pfi string—Specifies the Path Facility
		Identification Code sent in the MDL Path
		message; can be up to 38 characters.
		• port string—Specifies the Port number string
		sent in the MDL Idle Signal message; can be
		up to 38 characters.
		• unit string—Unit identification code (up to 6
		characters), which is a value that identifies the
		equipment location within a subslot according
		to ANSI T1.107-1995.
		• transmit idle-signal—Enables transmission
		of the MDL idle signal message. An MDL idle
		signal message, as defined by ANSI T1.107, is
		distinguished from path and test signal
		messages in that it contains a port number as
		its final data element.
		• transmit path—Enables transmission of the
		MDL path message. An MDL path message,
		as defined by ANSI T1.107, is distinguished
		from idle and test signal messages in that it
		contains a facility identification code as its
		final data element.
		• transmit test-signal—Enables transmission
		of the MDL test signal message. An MDL test
		signal message, as defined by ANSI T1.107, is
		distinguished from path and idle signal
		messages in that it contains a generator
		number as its final data element.
	Cisco 7304 Router Modular Services Card and Shared Port Adapter Software Configuration Guide
OL-4807-02			13-9