Emulex EMULEX manual Downloadfcode filename, Getfwrev, Downloadfw filename, Getbootrev

Page 17

download_fcode <filename>

Downloads the specified FCode image file to the HBA.

Example:

emlxadm> download_fcode LP10000DC-S.fcode


Image Components: REL type size=33848
	DWC file:	BOOT: version=03841512, 1.50a2
Current: Fcode: 1.50a1
New:	Fcode: 1.50a2		33848 (0x8438)	bytes

Are you sure you want to download this image? (y or n): y

Downloading...

Result: Operation successful.

Done.

Note: If the file name is not provided, the program attempts to identify the adapter model, then downloads a default FCode image file, if one is available.

get_fw_rev

Returns the current firmware revision of the HBA.

Example:

emlxadm> get_fw_rev

Firmware revision: LP10000DC-S 1.90a4

download_fw <filename>

Downloads the specified firmware image file to the HBA.

Example:

emlxadm> download_fw LP10000DC-S.fw


Image Components: NOP type
	AWC file:	KERN: version=ff801315,		1.30a5
	DWC file:	SLI2: version=07831914,		1.90a4
	DWC prog:	TEST: version=00f51010,		1.00a0
	DWC prog:	STUB: version=02881914,		1.90a4
	DWC prog:	SLI1: version=06831914,		1.90a4
	DWC prog:	SLI2: version=07831914,		1.90a4
Current: Firmware: 1.90a3
New:	Firmware: 1.90a4		366712 (0x59878)	bytes

Are you sure you want to download this image? (y or n): y

Downloading...

Done.

Note: If the file name is not provided, the program attempts to identify the adapter model, then downloads a default firmware image file, if one is available.

get_boot_rev

Returns the current boot revision of the HBA.

Example:

FCA Utilities Reference Manual

Page 13

Image 17

Contents FCA Utilities FCA Utilities Reference Manual Introduction Hba Using the emlxdrv UtilitySolaris Fibre Channel Stack Fibre Channel OverviewSolaris Software Stack Enter y. The following message is displayed Installing the UtilitiesRemoving the Utilities Using the emlxuremove Script To remove the emlxu utilities package, do the following Installing the Utilities Package ManuallyRemoving the Utilities Package Manually Updating the Utilities Package Manually Update the emlxu utilities by doing the followingModes of Operation emlxadm Interactive Mode emlxadmCLI Mode emlxadm Command Descriptions emlxadmGetlogiparams wwpn GetnumdevsGetdevlist FCA Utilities Reference Manual Getsympname GethostparamsSetsympname string GetsymnnameDevlogout Devlogin wwpnGetstate wwpn Devremove wwpnDownloadfcode filename GetbootrevGetfwrev Downloadfw filenameDownloads the specified boot image file to the HBA Example Downloadboot filenameGetdumpsize ForcedumpResethard Resetlink wwpn or zero for local linkResethardcore GettopologyType PID Returns a list of configurable parameters Example Returns the total number of configurable parameters ExampleParmgetnum ParmgetlistFCA Utilities Reference Manual Gets the value of a specified parameter in the driver Parmget labelExample This example attempts to set a static parameter Parmset label valueMsgbuf all or number -i interval Displays all of the current host HBA API attributes Example GethostattrsGetportattrs index, wwn or all Seagate ST39103FC = Seagate ST39103FC Exits the utility program Example Displays a help menu of utility commands ExampleGetpath index Hba Repeats the last command ExampleEmlxdrv utility program can be run in two modes Interactive Interactive Mode emlxdrvModes of Operation emlxdrv CLI Mode emlxdrv Setemlxs alias Command Descriptions emlxdrvSetemlxssun SetemlxsallCleardev alias Setlpfc aliasSetlpfcnonsun Clearemlxs ClearlpfcClearsun ClearnonsunClearall Emlxdrv q Exiting