Emulex EMULEX manual FCA Utilities Reference Manual

Page 2

Copyright© 2005 Emulex Corporation. All rights reserved worldwide. No part of this document may be reproduced by any means nor translated to any electronic medium without the written consent of Emulex Corporation.

Information furnished by Emulex Corporation is believed to be accurate and reliable. However, no responsibility is assumed by Emulex Corporation for its use; or for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Emulex Corporation.

Emulex and LightPulse are registered trademarks, and AutoPilot Installer, AutoPilot Manager, BlockGuard, FibreSpy, HBAnyware, InSpeed, MultiPulse, SLI and SBOD are trademarks, of Emulex Corporation. All other brand or product names referenced herein are trademarks or registered trademarks of their respective companies or organizations.

Emulex provides this manual "as is" without any warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Emulex Corporation may make improvements and changes to the product described in this manual at any time and without any notice. Emulex Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties that may result. Periodic changes are made to information contained herein; although these changes will be incorporated into new editions of this manual, Emulex Corporation disclaims any undertaking to give notice of such changes.

FCA Utilities Reference Manual

Page ii

Image 2
Contents FCA Utilities FCA Utilities Reference Manual Introduction Using the emlxdrv Utility HbaFibre Channel Overview Solaris Fibre Channel StackSolaris Software Stack Installing the Utilities Enter y. The following message is displayedRemoving the Utilities Using the emlxuremove Script To remove the emlxu utilities package, do the following Installing the Utilities Package ManuallyRemoving the Utilities Package Manually Update the emlxu utilities by doing the following Updating the Utilities Package ManuallyInteractive Mode emlxadm Modes of Operation emlxadmCommand Descriptions emlxadm CLI Mode emlxadmGetlogiparams wwpn GetnumdevsGetdevlist FCA Utilities Reference Manual Setsympname string GethostparamsGetsympname GetsymnnameGetstate wwpn Devlogin wwpnDevlogout Devremove wwpnGetfwrev GetbootrevDownloadfcode filename Downloadfw filenameGetdumpsize Downloadboot filenameDownloads the specified boot image file to the HBA Example ForcedumpResethardcore Resetlink wwpn or zero for local linkResethard GettopologyType PID Parmgetnum Returns the total number of configurable parameters ExampleReturns a list of configurable parameters Example ParmgetlistFCA Utilities Reference Manual Parmget label Gets the value of a specified parameter in the driverExample This example attempts to set a static parameter Parmset label valueMsgbuf all or number -i interval Displays all of the current host HBA API attributes Example GethostattrsGetportattrs index, wwn or all Seagate ST39103FC = Seagate ST39103FC Exits the utility program Example Displays a help menu of utility commands ExampleGetpath index Repeats the last command Example HbaEmlxdrv utility program can be run in two modes Interactive Interactive Mode emlxdrvModes of Operation emlxdrv CLI Mode emlxdrv Setemlxssun Command Descriptions emlxdrvSetemlxs alias SetemlxsallCleardev alias Setlpfc aliasSetlpfcnonsun Clearsun ClearlpfcClearemlxs ClearnonsunClearall Emlxdrv q Exiting