Emulex EMULEX manual FCA Utilities Reference Manual

Page 22

dynamic: yes

desc: Verbose mask for error messages to the console.

-----------------------------------------------------------------

label: log-notices min: 0x0

current: 0xffffffff max: 0xffffffff default: 0xffffffff

dynamic: yes

desc: Verbose mask for notice messages to the messages file.

-----------------------------------------------------------------

label: log-warnings min: 0x0

current: 0xffffffff max: 0xffffffff default: 0xffffffff

dynamic: yes

desc: Verbose mask for warning messages to the messages file.

-----------------------------------------------------------------

label: log-errors min: 0x0

current: 0xffffffff max: 0xffffffff default: 0xffffffff

dynamic: yes

desc: Verbose mask for error messages to the messages file.

-----------------------------------------------------------------

label: num-iocbs min: 128

current: 1024 max: 10240 default: 1024

dynamic: no

desc: Number of outstanding IOCBs driver can queue to adapter

-----------------------------------------------------------------

label: ub-bufs min: 40

current: 1000 max: 16320 default: 1000

dynamic: no

desc: Number of unsolicited buffers the driver should allocate.

-----------------------------------------------------------------

label: network-on min: 0

current: 1 max: 1 default: 1 dynamic: no

desc: Enable IP processing

-----------------------------------------------------------------

label: ack0 min: 0

current: 0 max: 1 default: 0 dynamic: no

desc: Enable ACK0 support

-----------------------------------------------------------------

label: topology min: 0

current: 0 max: 6 default: 0

FCA Utilities Reference Manual

Page 18

Image 22

Contents FCA Utilities FCA Utilities Reference Manual Introduction Using the emlxdrv Utility HbaFibre Channel Overview Solaris Fibre Channel StackSolaris Software Stack Installing the Utilities Enter y. The following message is displayedRemoving the Utilities Using the emlxuremove Script Removing the Utilities Package Manually Installing the Utilities Package ManuallyTo remove the emlxu utilities package, do the following Update the emlxu utilities by doing the following Updating the Utilities Package ManuallyInteractive Mode emlxadm Modes of Operation emlxadmCommand Descriptions emlxadm CLI Mode emlxadmGetdevlist GetnumdevsGetlogiparams wwpn FCA Utilities Reference Manual Setsympname string GethostparamsGetsympname GetsymnnameGetstate wwpn Devlogin wwpnDevlogout Devremove wwpnGetfwrev GetbootrevDownloadfcode filename Downloadfw filenameGetdumpsize Downloadboot filenameDownloads the specified boot image file to the HBA Example ForcedumpResethardcore Resetlink wwpn or zero for local linkResethard GettopologyType PID Parmgetnum Returns the total number of configurable parameters ExampleReturns a list of configurable parameters Example ParmgetlistFCA Utilities Reference Manual Parmget label Gets the value of a specified parameter in the driverMsgbuf all or number -i interval Parmset label valueExample This example attempts to set a static parameter Getportattrs index, wwn or all GethostattrsDisplays all of the current host HBA API attributes Example Seagate ST39103FC = Seagate ST39103FC Getpath index Displays a help menu of utility commands ExampleExits the utility program Example Repeats the last command Example HbaModes of Operation emlxdrv Interactive Mode emlxdrvEmlxdrv utility program can be run in two modes Interactive CLI Mode emlxdrv Setemlxssun Command Descriptions emlxdrvSetemlxs alias SetemlxsallSetlpfcnonsun Setlpfc aliasCleardev alias Clearsun ClearlpfcClearemlxs ClearnonsunClearall Emlxdrv q Exiting