Cabletron Systems 9H533-24, 9H532-24 manual Functions of the INB transmit LED are listed in Table

Page 35

LANVIEW LEDs

The functions of the two System Status LEDs, System Management Bus (SMB) and the CPU, are listed in Table 4-1.

Table 4-1. System Status (SMB and CPU) LEDs

LED Color	State	Description


Green	Functional	Fully operational

Yellow	Testing	Power-up testing

Yellow (Flashing)	Crippled	Not fully operational (e.g., one bad port)

Yellow/Green	Booting	Blinks yellow and green while booting

Red	Reset	Normal power-up reset

Red (Flashing)	Failed	Fatal error has occurred

Off	Power off	Module powered off

The functions of the INB transmit LED are listed in Table 4-2.

	Table 4-2. INB Transmit LED

LED Color	State


Green (Flashing)	Data activity

Yellow (Flashing)	Port in standby state

Red (Flashing)	Collision

Red	Fault

Off	No activity, Port disabled

4-3

Image 35

Contents 9033050-02 Page FCC Notice Cabletron SYSTEMS, INC Program License Agreement Iii Cabletron Systems Limited Program License Agreement Page Page Declaration of Conformity Viii Contents Contents Introduction FeaturesIntroduction Auto-Negotiation Management Broadcast Suppression Priority Indicator Transmit Queue Switching Options Related Manuals Introduction Unpacking the Module User Accessible ComponentsInstalling the SmartSwitch 9000 Module Switch Function Description Using DIP Switch Installing the Module into the SmartSwitch 9000 ChassisInstalling the Module Reset Switch Reset Switch100BASE-FX Network Cabling Requirements10BASE-T Network 100BASE-TX NetworkInstalling the SmartSwitch 9000 Module Technical Overview SmartSwitch ArchitectureTechnical Overview System Management BusesSMB-10 Bus System Diagnostic ControllerSMB-1 Bus I960 Core DC/DC ConverterINB Interface Lanview LEDs LED Mode SwitchLanview LEDs Functions of the INB transmit LED are listed in Table Functions of the INB receive LED are listed in Table DPX Status LEDs 9H532-24 only Lanview LEDs Technical Speciﬁcations SpeciﬁcationsPhysical ServiceRegulatory Compliance