Cabletron Systems 9H533-24, 9H532-24, 9H531-24 manual Reset Switch

Page 26

Installing the SmartSwitch 9000 Module

The Reset Switch

The Reset switch is located under the top plastic tab as shown in Figure 2-3.

Use the reset switch to reset the moduleÕs processor, shutdown (power down) the module, and/or restart the module.

¥To reset the moduleÕs i960 processor, press the reset switch twice within three seconds.

¥To shut down the module, press and hold the reset switch for three or more seconds.

¥To restart the module, press the reset switch momentarily.

SNMP management may be used to disable this switch to enhance module security.

Reset Switch

SMB CPU

Figure 2-3. The Reset Switch

2-6

Image 26

Contents 9033050-02 Page FCC Notice Cabletron SYSTEMS, INC Program License Agreement Iii Cabletron Systems Limited Program License Agreement Page Page Declaration of Conformity Viii Contents Contents Features IntroductionIntroduction Auto-Negotiation Management Broadcast Suppression Priority Indicator Transmit Queue Switching Options Related Manuals Introduction User Accessible Components Unpacking the ModuleInstalling the SmartSwitch 9000 Module Switch Function Description Installing the Module into the SmartSwitch 9000 Chassis Using DIP SwitchInstalling the Module Reset Switch Reset Switch100BASE-TX Network Cabling Requirements10BASE-T Network 100BASE-FX NetworkInstalling the SmartSwitch 9000 Module SmartSwitch Architecture Technical OverviewSystem Management Buses Technical OverviewSMB-10 Bus System Diagnostic ControllerSMB-1 Bus I960 Core DC/DC ConverterINB Interface LED Mode Switch Lanview LEDsLanview LEDs Functions of the INB transmit LED are listed in Table Functions of the INB receive LED are listed in Table DPX Status LEDs 9H532-24 only Lanview LEDs Speciﬁcations Technical SpeciﬁcationsPhysical ServiceRegulatory Compliance