Cabletron Systems STHI manual TPIM-F3 for Single Mode Fiber, Parameter Typical Minimum Maximum

Fiber Optic TPIM Specifications

A.3.2 TPIM-F3 for Single Mode Fiber

The TPIM-F3 connector supports Single Mode Fiber Optic cabling.

Transmitter Power decreases as temperatures rise. Use the Output Power Coefficient (-0.15 dBm) to calculate increased or decreased power output for the operating environment. For example, the typical power output at 25°C is -16.4 dBm. For a 4°C temperature increase, multiply the typical coefficient (-0.15 dBm) by four and add the result to typical output power: (4 x -0.15 dBm + -16.4 = -17.0).

			Maximum Sensitivity (-36.0)
Receive			Typical Sensitivity (-31.0)
Sensitivity
			Minimum Sensitivity (-30.0)
									Minimum Receive Input (-9.72)
Maximum									Typical Receive Input (-7.5)
Receive
Input Power									Maximum Receive Input (-6.99)
Transmitter Power*							Maximum Transmit Power (-12.0)
(At 25°C into
							Typical Transmit Power (-15.5)
8.3/125∝m fiber)
							Minimum Transmit Power (-21.0)
dBm -40 -35	-30 -25			-20 -15	-10		-5			0
Less Power								More Power
* Transmit Power	Typical Power			Minimum Power				Maximum Power
Coefficient	-0.15dBm/°C			-0.12 dBm/°C						-0.18 dBm/°C
Figure A-4. Transmitter Power Levels
Table A-3. TPIM-F3 Specifications
Parameter		Typical			Minimum						Maximum
Transmitter		1300 nm				1270 nm					1330 nm
Peak Wave Length
Spectral Width		60 nm					–				100 nm
Rise Time		3.0 nsec				2.7 nsec					5.0 nsec

Page A-4