Cabletron Systems STHI manual System Level Screen, System Date and System Time, IP Address

The System Level Screen

5.3 The System Level Screen

Access the System Level screen (Figure 5-4) from the Device Setup menu.

STHI LOCAL MANAGEMENT		Flash Image Version: 1.00.00
	SYSTEM LEVEL
System Date: 06/15/10		System Time: 13:08:00
	IP Address	Subnet Mask
SNMP Agent	134.141.143.141	255.255.0.0
Enable IP Address Discovery:			[YES] State: [SEEKING ]
Retry Interval (0001-9999 Mins):			0015
Enable Beacon Recovery:			[YES]
Number of Retries (000-100, 999=infinite):			004
Retry Interval (000-999 Secs):			021
FNB MAC Address - Physical:			00-00-B8-00-00-00
FNB MAC Address - Locally Administered:			00-00-B8-E8-A5-B1
SAVE			RETURN

Figure 5-4. System Level Screen

5.3.1System Date and System Time

Use these fields to set the correct date and time.

Type the date into the field in a MM/DD/YY format for the date, and HH:MM:SS for the time. If the format entered is invalid, the message “Invalid Date” or “Invalid Time” appears and the edit is rejected.

5.3.2IP Address

Use this field to set the host Internet Protocol (IP) address for the STHI.

If the IP Address is changed, the STHI will execute a soft-reset after SAVE is invoked to re-initialize all affected parameters.

Only a user with Super-User access can change the device’s

TIP IP address. See Section 5.4 for information about Super-User access.

Page 5-8