Cabletron Systems 1088, 1082 Backplane Device View, MAC Address Label, Network Information Label

D e v i c e V i e w s

default application for this view is Physical (MIB- II). To select the application to be displayed (Physical or Bridging), click the Filter menu button in the Interface Options panel. This label provides double-click access to Port Configuration - CSIIfPort View (page 49).

MAC Address Label

This label displays the physical address of the network interface module and accesses the CSI Port Model Information view described in SPECTRUM Views.

Network Information Label

This label displays the network address, name, or subnet mask, which you select using the Interface Options panel. The default is network address. Double-click this label to access the Secondary Address Panel described in SPECTRUM Views.

Table 12: Physical Application

Administrative Status

Color	Status	Description
Green	ON	Port is operational
Blue	OFF	Port is off
Yellow	TST	Port is in the test mode

			B a c k p l a n e D e v i c e V i e w
	Table 13:		Bridging Application
		Administrative Status
Color		Status	Description
Green		FWD	Bridge port is forwarding
Blue		DIS	Port is disabled
Magenta		LST	Bridge is in listening mode
Magenta		LRN	Bridge is in learning mode
Orange		BLK	Bridge port is in blocking mode
Red		BRK	Bridge port is broken

Gauge Label

This label displays the performance statistic that you set in the Gauge Control Panel, which is accessible from the Interface Options panel. Double-click this label to access the Performance view. For me information seethe information in the SPECTRUM Views documentation.

Backplane Device View

Access: From the Chassis Device view, select View > Page > Back plane.

A sample Backplane Device view is shown in Figure 9. The view contains Backplane Module icons that represent the backplane connections

S p e c t r u m E n t e r p r i s e M a n a g e r Page 32 S m a r t S w i t c h 6 0 0 0