Cabletron Systems 1082, SM-CSI1076, 1088 manual Trap Configuration, Alarm Configuration

C o n f i g u r a t i o n V i e w s

Trap Configuration

This area of the Repeater Configuration view allows you to enable or disable the following traps.

Link Traps

Allows all packets indicating a change in link status to be reported within the trap database. Possible menu selections are: Disable, Enable, and other.

Segmentation Traps

Allows all packets indicating a change in segmentation status to be reported within the trap database. Possible menu selections are: Disable, Enable, and other.

Alarm Configuration

This area of the Repeater Configuration view provides configuration information on generating alarms for the selected module. This area contains the fields described below.

Timebase

Displays the user defined time interval, in seconds, for the Traffic Threshold. The lowest allowable value is 10.

R e p e a t e r C o n f i g u r a t i o n V i e w

Traffic Alarms

Allows you to enable or disable detection of Traffic Alarms.

Traffic Threshold

Displays the threshold value for the number of packets that can be transmitted during the Timebase before generating a traffic alarm. This field is user-configurable from 1 to 4 billion.

Collision Alarms

Allows you to enable or disable detection of Collision Alarms.

Collision Threshold

Displays the threshold value within the alarm timebase which, once that number of collisions per good packet is exceeded, generates a collision alarm. This value is user-configurable. Allowable range is 1 to 15 collisions per good packet.

Broadcast Alarms

Allows you to enable or disable detection of Broadcast Alarms.

Broadcast Threshold

Displays the threshold value within the alarm timebase which, once that number of broadcasts received is exceeded, generates a broadcast alarm. This value is user-configurable. Allowable range is 1 to ~4 billion.

S p e c t r u m E n t e r p r i s e M a n a g e r Page 57 S m a r t S w i t c h 6 0 0 0