Cisco Systems ASR 1000 Enters the mode of a DBE service and enters into SBC-DBE, Milliseconds

Chapter 3 DTMF Interworking

Configuring Default Duration of a DTMF Event

DETAILED STEPS

	Command or Action	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	sbc {sbc-name}dbe	Enters the mode of a DBE service and enters into SBC-DBE
		configuration mode. Use the sbc-nameargument to specify
	Example:	the name of the DBE service.
	Router(config)# sbc global dbe
Step 4
	vdbe [global]	Enters into VDBE configuration mode with a default DBE
		named “global.”
	Example:	Only one DBE is supported and its name must be “global.”
	Router(config-sbc-dbe)# vdbe global
Step 5
	dtmf-duration {duration}	Configures the default duration of a DTMF event in
		milliseconds.
	Example:
	Router(config-sbc-dbe-vdbe)# dtmf-duration 250
Step 6
	exit	Exits VDBE configuration mode.
	Example:
	Router(config-sbc-dbe-vdbe)# exit
Step 7
	end	Exits SBC-DBE configuration mode and returns to
		privileged EXEC mode.
	Example:
	Router(config-sbc-dbe)# end

Cisco IOS XE Integrated Session Border Controller Configuration Guide for the Cisco ASR 1000 Series Aggregation Services Routers

OL-15421-01 3-3