Cisco Systems ASR 1000 manual Profile Packages, Package ID Version

Chapter 2 Configuring Integrated Session Border Controller

Cisco H.248 Profile

Table 2-1	Context Attributes
Context Attribute		Supported	Values Supported
Context Attribute Descriptor		No	N/A
ContextIDList Parameter		No	N/A
AND/OR Context Attribute		No	N/A

The termination ID structure is provisioned in the MGC. The MGC is at liberty to choose any termination naming structure. The DBE can accept 3 to 9 fields in the termination ID structure.

The following H.248 sub-series transports are supported by the profile:

•Supported transports: TCP or UDP

•Segmentation supported: UDP: Optional

Use of the Interim Authentication Header defined in H.248.1v2 is optional within this profile.

Profile Packages

This section specifies the packages that are supported in this profile. Mandatory packages are packages that are supported in the profile. Optional packages are packages that may be supported in the profile.

Table 2-2shows the mandatory packages supported by the Cisco profile.

Table 2-2	Mandatory Packages
Package Name		Package ID	Version
Base Root		root	2
Congestion Handling		chp	1
DTMF Detection		dd	1
DTMF Generation		dg	1
Diffserv		ds	1
Extended VPN Discrimination		evpnd	1
Inactivity Timer		it	1
Middlebox or EMP		emp	1
NAT Traversal		ntr	1
Network		nt	1
RTP		rtp	1
Traffic Management		tman	1

Table 2-3shows the optional packages supported by the Cisco profile.

Table 2-3 Optional Packages

	Package Name	Package ID	Version	Support Dependent On:
	Address Reporting	adr	1	Extension to ipnapt package
	End-Point Statistics	epstat	1
Cisco IOS XE Integrated Session Border Controller Configuration Guide for the Cisco ASR 1000 Series Aggregation Services Routers
OL-15421-01					2-15