C o n f i g u r a t i o n V i e w s
SMT Information
This area of the FddiMAC Device Configuration view provides the following configuration information on the FDDI SMT:
SMT Version
The version of Station Management (SMT) running.
OBS Present
Indicates whether an Optical Bypass Switch (OBS) is connected.
T-Notify (sec)
The timer value, in seconds, used in Neighbor Notification Protocol. The allowed range is from 2 to 30 seconds.
The Target Token Rotation Time (TTRT) bid, in milliseconds, made by this concentrator.
The winning TTRT bid, in milliseconds, on the ring.
TVX (milli sec)
The valid transmission time, in milliseconds.
A T M C l i e n t C o n f i g u r a t i o n V i e w
ATM Client Configuration View
This view provides VPI/VPC configuration information on the ATM interfaces.
Max VPCs (Virtual Path Connections)
The maximum number of VPCs supported at this ATM interface. At the UNI (User Network Interface), the maximum number of VPCs ranges from 0 to 256.
Max VCCs (Virtual Channel Connections)
The maximum number of VCCs supported at this ATM interface.
Conf VPCs
The number of VPCs configured for use at this ATM interface. At the UNI (User Network Interface), the configured number of VPCs ranges from 0 to 256.
Conf VCCs
The number of VCCs configured for use at this ATM interface.
Max VPI (Virtual Path Identifier) Bits
The maximum number of active VPI bits configured for use at this ATM interface. At the UNI (User Network Interface), the maximum number of active VPI bits configured for use ranges from 0 to 8.
S p e c t r u m E n t e r p r i s e M a n a g e r | Page 52 | S m a r t S w i t c h 6 0 0 0 |