D e v i c e V i e w s
Module Identification Labels
These labels provide the following information that identifies a specific device.
Slot Number
The module’s location in the chassis.
Model Type
The type of module in the chassis (for example
For more information on the Model Information view, refer to the SPECTRUM Views documentation.
Model Name
A
Backplane Connections Labels
These labels represent the interfaces between the module and the FTM backplane. The device- specific Icon Subviews menu selection for these labels is Configuration, which opens a dialog box that lets you enable or disable the selected port. Note in Figure 15 that the Backplane Module icon
B a c k p l a n e M o d u l e I c o n S u b v i e w s
has a gray Backplane Connection label (b4), which corresponds with interface four of the chassis backplane.
Table 15 describes the possible operational states of the backplane connections.
Table 15: Backplane Connection Status
Descriptions
Color | Status | Description |
|
|
|
Green | ON | Operational |
|
|
|
Yellow | NLK | Operational but not linked |
|
|
|
Magenta | Test | Operational test |
|
|
|
Blue | Off | Operationally and administratively |
|
| down |
|
|
|
Red | Off | Operationally down but |
|
| administratively enabled |
|
|
|
Gray | UNK | Unknown |
|
|
|
Chassis Information
The Chassis Information panel within the Backplane Device view provides the same information as a similar panel in the Chassis Device view described under Chassis Information (page 29).
S p e c t r u m E n t e r p r i s e M a n a g e r | Page 35 | S m a r t S w i t c h 6 0 0 0 |