C o n f i g u r a t i o n V i e w s
Max VCI (Virtual Channel Identifier) Bits The maximum number of active VCI bits configured for use at this ATM interface.
ILMI (Interim Local Management Interface) VPI The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of both ILMI VPI and ILMI VCI equal 0, then the ILMI is not supported for this ATM interface.
ILMI VCI
The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of both ILMI VPI and ILMI VCI equal 0, then the ILMI is not supported for this ATM interface.
Address Type
The type of primary ATM address configured for use at this ATM interface.
Admin Address
The address assigned for administrative purposes. If this interface has no assigned administrative address or if the address used for
administrative purposes is the same as that used for the physical address, then this is an octet string of zero length.
Neighbor Address
The IP address of the neighbor system connected to the far end of this interface to which a Network
A T M C l i e n t C o n f i g u r a t i o n V i e w
Management Station can send SNMP messages as IP datagrams to UDP port 161 in order to access network management information concerning the operation of that system.
Neighbor If Name
The name of the interface on the neighbor system at the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical to that of the ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a name, the value of this object is a zero length string.
S p e c t r u m E n t e r p r i s e M a n a g e r | Page 53 | S m a r t S w i t c h 6 0 0 0 |