Cabletron Systems EMC39-12 manual Appendix B Twisted Pair Wiring Tables

APPENDIX B

TWISTED PAIR WIRING TABLES

This appendix contains twisted pair wiring tables which will assist you if you are using a Punch Down Block (see Figure B-1) to wire your twisted pair segments. The following tables are included in this appendix:

•Table B-1 Twisted Pair Wiring from an EMC39-12 to a Punch Down Block

•Table B-2 Twisted Pair Wiring from a Punch Down Block to a 10Base-T Device

B.1 TWISTED PAIR WIRING FROM AN EMC39-12 TO A PUNCH DOWN BLOCK

NOTE

Pins 25 and 50 on the Champ connector are not used.

.

Table B-1 EMC39-12 to a Punch Down Block

From	Into and Out of 50		Into Punch Down
EMC39-12	Pin Feeder Cable		Block
Port 12
Pin	Pin		Pin
TX+ 48	48	Violet/GreenTX+	A45 Violet/Green TX+
TX-23	23	Green/VioletTX-	A46 Green/Violet TX-
RX+49	49	Violet/BrownRX+	A47 Violet/Brown RX+
RX-24	24	Brown/VioletRX-	A48 Brown/Violet RX-
Port 11
Pin	Pin		Pin
TX+46	46	Violet/BlueTX+	A41 Violet/Blue TX+

EMC39-12 User’s Guide Page B-1