Appendix A: EPIM Information
A.1.2 EPIM-100FX
The
16X
5X
15X
4X
14X
3X
13X
2X
12X
1X
EPIM | 2 |
LNK
EPIM | 1 |
1510_10
Figure A-2 EPIM-100FX
Table A-1 Transmitter Power (EPIM-100FX)
Cable Type | Worst Case Budget | Typical Budget |
|
|
|
|
|
|
50/125 ∝m fiber optic | 6.0 dB | 9.0 dB |
|
|
|
62.5/125 ∝m fiber optic | 9.0 dB | 12.0 dB |
|
|
|
100/140 ∝m fiber optic | 15.0 dB | 18.0 dB |
|
|
|
The transmitter power levels listed above are peak power levels after optical overshoot. A peak power meter must be used to correctly compare the values given above to those measured on any particular port. If power levels are being measured with an average power meter, add 3 dBm to the measurement to compare the measured values to the values listed above.
SEH100TX User’s Guide |