Extron electronic MC104 IP setup guide Left Side, Buttons

Page 11

Hardware Setup, cont’d

Left Side Panel Features and Connections

Front Panel Features and Basic Operation

There are several features that must be set up prior to using the MLC. Refer to chapter 4 in the MLC 104 Series User's Manual for details.

12

R

1

Left Side

MLC 104 Series

Left Side Panel

DISPLAY
ON	OFF
VOLUME
3

CONFIG

VCR

1

DVD

2

PC	3

4

MLC 104 IP

A	Reset button and LED — Pressing this recessed button causes
	various IP functions and Ethernet connection settings to be reset
	to their factory defaults. Refer to chapter 2 in the
	MLC 104 Series User's Manual for details.

MLC 104, MLC 104 IP	4
Front Panel

Buttons

	The MLC 104 Series controllers have backlit buttons. The
	button caps are removable so the button labels can be changed.
A	Display On/Off buttons — After they have been configured,
	press the On button to turn the display device on, and press the
	Off button to power it off. Only one of these two buttons can
	be selected (active) at once. Using Global Configurator, other
	functions can be associated with each of these buttons.
B	Input selection buttons — By default, these buttons are a
	mutually exclusive group (only one of these buttons can be
	selected at a time).
	Press an input selection button to select the desired audio and
	video input on the projector or an optional Extron switcher.
	The button lights brighter and remains lit while an audio-video
	input is selected.

2-6

MLC 104 Series MediaLink Controllers • Hardware Setup

MLC 104 Series MediaLink Controllers • Hardware Setup

2-7

Image 11

Contents MLC 104 and MLC 104 IP Series Precautions 安全须知中文 Table of Contents MLC 104 MediaLink Controllers Table of Contents, cont’dAbout the MLC 104 Medialink Controllers About Global ConfiguratorIntroduction About this ManualUpdating Firmware Installing the SoftwareIntroduction, cont’d System RequirementsTwo An MLC 104 series controller daisy chained to a SCP Hardware SetupRight Side Panel Features and Connections Power wiring Hardware Setup, cont’dButtons Left SideBaud Stop bit No parity Data bits No flow control Volume controlConfiguration host control port Pin out for TRS RS-232 cable wiringIP model only Software SetupDownload Device Drivers MLC 104 IP Software Setup, cont’d Create a New ProjectProject Settings dialog box Add Device dialog box Basic for IP version onlyAdd Device dialog box Advanced for IP version only Software Setup, cont’dGlobal Configurator Front Panel window Email Manager dialog box Defining e-mail server settingsSetting up e-mail notifications Downloading additional drivers MLC 104 series port configurationAdd a Serial or IR Device Adding e-mail contactsAdd IR Driver window Add Serial Driver windowFront Panel window with configured buttons Software Setup, cont’d Configure the Front Panel ButtonsConfiguring an input button Configuring the On and Off buttonsDisplay shutdown action selection dialog Software Setup, cont’d Create a Display Shutdown ScheduleScheduled Actions Wizard Available Options window Conditions dialog. The Monitored Conditions WizardMonitored Conditions Wizard dialog Under the Available Options windowDisplay lamp hour e-mail notification Build and Upload a ConfigurationBuilding a configuration Create a Display Disconnection E-mail IP model onlyGlobalViewer main Uploading a configurationAccessing GlobalViewer Upload Manager window before file upload