MSX1616 Matrix Switcher - Quick Start, continued
Front Panel Controls
Buttons to the left of the LCD let you navigate through the LCD menu options.
Arrowed buttons let you increase or decrease a selection, scroll up or down, move forward and backward, and change inputs and outputs.
MENU displays the status menu on the initial press. Subsequent presses display the next menu level up.
ENTER saves newly selected menu settings.
VOLUME adjusts the volume of the selected audio output or input.
MUTE silences the selected audio output.
INPUT and OUTPUT buttons configure any number of new patches.
TAKE performs the
PRESET recalls a preset configuration, which includes all input/output patches and volume levels.
BLANK acts as an input when creating patches. Use it to blank any or all outputs.
CANCEL deletes unsaved configurations.
2002 - INLINE, INC.
Functionality
Creating new patches
1.Press the button of the desired input device.
2.Press the button(s) of the output(s) where you want the input signal sent.
3.Repeat steps 1 and 2 until all connections are defined.
4.Press TAKE to perform the patches.
Alternately, use the LCD menu.
Adjusting audio levels
1.Use the VOLUME buttons on the front panel to increase or decrease volume level for the currently selected output.
2.Press MUTE to silence the audio output.
Creating a preset
1.Set all desired input/output patches, audio levels, and mute states.
2.Press MENU.
3.Select 3UHVHW6WRUH on the LCD.
4.Press any one of the input or output buttons to select a storage location for this preset.
Result: The switcher stores the current configuration into memory.
Viewing switches
1.On the LCD Menu, select
3UHYLHZ.
2.Select and press an input or output button to see all current switches. Result: The LED indicators above each button glow to indicate all stored patches for those inputs/outputs.
MSX1616 OPERATION MANUAL - v1.0 5/8/02